Details:
Advantages of Programming Card
With the programming card, you can adjust various settings of the ESC. A special feature is to adjust the two type of Lithium batteries cutoff voltage accurately. You can adjust timing, different brake modes and governor speed by selection buttons. Present settings can be read back from ESC with the LED display. Also you can connect PC with the USB port to upgrade the ESC firmware and set with the fine settings.
Instruction:
Connect with battery, after 3S, motor beeps and one light in the first row is on, this means ESC and programming card is connected successfully or if the first row lights are all off, means not connect successfully, you need power again. After successfully connected, you can set the parameters of ESC through programming card, Up and Down button for function selections, Left and Right button for the details, confirmation button is to confirm and store the data in ESC.
Tips-1: While the parameters can’t be stored successfully to ESC, a short beep from motor to alert an error, if stored successfully, there will be a long beep.
Tips-2: You can press confirmation button to read back and show the parameters while one whole line of programming card LED lights are off or one cell of the table is empty(ex: line 6, column 7), this is another way to manage ESC settings in the case of none cutting off power.
Tips-3: Before disconnecting ESC and programming card, you can roll down and up each line of the menu to confirm the settings. This is only for the latest setting records, not for all the ESC settings. If you need to check the other settings, you need to reconnect battery and read then or according Tips-2 to read back.
Tips-4: Some parameters settings rely on the other parameters; such like Brake, only at plane mode can be set, if not plane mode, will alert an error with a short beep.
After all adjustments, we strongly suggest you to cut the power and power again to confirm all the settings.
Contact information
Contact: Mike
Mobile: +8615602904669
Telephone: (86)755-28243629
Mail: sales-jane@sunrisemodel.com
Fax: 0755-2843-7034
Address: 4th Floor, Building 8, Third Park, Xinsheng Science and Technology Park, Longgang District, Shenzhen
PROG Card
Model: SWORD PROG-CARD
PCB Size: 112MM*72MM
Weight: 19g
- SWORD Manual.PDF
- SWORD Manual.ZIP
